NEW! Morse Verti-Karrier Below-Hook 30-Gallon Drum Lifter 1000 Lb. Cap!!

Description

NEW! Morse Verti-Karrier Below-Hook 30-Gallon Drum Lifter 1000 Lb. Cap!!
SHIPPING IS IN THE LOWER 48 STATES-SHIPS TRUCKLINE
Usually ships in 15 to 18 days
Verti-Karrier, Below-Hook, 30-Gallon Drum Lifter, 1000 Lbs. Capacity
Use Verti-Karrier Drum Lifter hoist attachments to grab and lift your 55-gallon steel drum by gripping under the top rim. Then move and place your drum almost anywhere.
Load a drum to and from remote or hard-to-reach areas
Attach the Verti-Karrier drum grab to your hoist or crane
Move drum picker and lower onto the top of drum
As the drum grab is elevated it grips drum automatically under the top rim
When the drum is lowered to the ground, the drum grab carriage drops down and automatically locks in the open position, releasing the load
The Verti-Karrier drum grab is then ready to lift another drum
The drum picker grip will not disconnect until drum is fully down. You only need to operate your hoist to guide drum grab into position. This saves operator time and protects against dangerous climbing.
Capacity: Lift a drum weighing up to 1,000 Lb. (454 kg).
Model 90, 90M and 90-SS drum lifters are sized for your 55-gallon steel drum (208 liter steel drum). They have 3 different settings, and should be adjusted to grip the sidewall under the rim of your drum.
Set in the top hole it will grip to 22-1/16 (56 cm) diameter drum
Middle hole to 22-3/16 (56.4 cm) diameter
Bottom hole to 22-7/16 57 cm) diameter
Each Verti-Karrier below the hook Drum Lifter is load tested at the factory at 125% of rated capacity as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit. Morse Verti-Karrier Drum Lifters are NOT for a drum without lid or top in place.
WBB806560
Product Specifications
CAPACITY GALLONS
30
CAPACITY LBS
1000
COLOR FINISH
Blue
APPROVAL OR CERTIFIED
ANSI/ASME B30.20, ANSI/AWS D14.1 and ASME BTH-1
BRAND
Morse
CONSTRUCTION
Carbon Steel
FITS DRUM DIAMETER INCHES
18-1/16 to 18-7/16
MANUFACTURERS PART NUMBER
90-30
TYPE
Verti-Karrier
WEIGHT LBS
45